Cartridge
cification

Shelf life: years
Housing: High impact black polymer
Patent: U.S. 5,078,117
3.

Reversible cartridge instaliaticJn
Anti-Felon Identification (AFID) tracking system with serialized microdots.
Drive stun capability (when attached to TASER electronic control

~~-I~*I-L

l:iJ=<-!

10

STANDARD

10

I~"---"-rl-L

I:D=--l

XP

i
i
are in English [metric].
Actual wire length may be up to 6" longer.
For training cartridges see TASER specification RD-SPEC-CRTG-002.
Material Safety Data Sheet (MSDS) related to nitrogen gas charged cartridges available upon request.
Dart grouping distances are averages measured in correlation to the laser dot projection at specified distance, test
performed at ambient temperature [70 ' F (25 'C)], results listed are averaged +/-0.50" [1 .27 cm]. "Spread" is
average measurement from top dart to bottom dart.
6. Product specification may change without notice; actual product may vary from picture.
7. Additional models available. Please contact a TASER International sales representati ve for more information.
8.
I Inc. All i
reserved.
2.
3.
4.
5.

RD-SPEC-CRTG-001 Rev: H

October 2, 2006

TASER International reserves the right to change this specification without notice.

Page: 1 of 1

I NTERNA"I" I O N A L

Live Simulation
T ASER® Cartri

Models
Model

Model No.

Propellant

TASER® LS (Live Simulation) Cartridge 21' [6.40 m)

44205

Compressed
Nitrogen"

21' [6.40 m)

TASER® Movie Cartridge 21' [6.40 m)

44400

21' [6.40 m)

Silver

TASER® Movie Cartridge 15' [4 .57 m)

34400

Compressed
Nitroaen'
Compressed
N~rogen'

15' [4.57 m)

Yellow

Specifications
1. Shelf life: 5 years
2. Housing: High impact blue polymer
3. Patent: U.S. 5,078,117
4. 0.017" [0.45 mm) diameter 25 Ib
[1 .09 kg) test non-conductive nylon
wire leads

1.

2.

Range

DoorlWedge
Color
Blue/Blue
BluelWhite

Features
Live simulation cartridges with white wedges contain non-conductive
plastic electrodes to permit drive-stun training without transmitting
electrical pulses to the training subject.
Nylon line is non-conductive on all simulation cartridges and wi ll not
transmit electrical pulses to the probes.
Reversible cartridge installation.

0.250" [6 .35 mm)

~I·~·*I-L
o~_1:fi===-!

L:::I

Simulation Probe

1"

2.
3.
4.
5.

i

i

are

i

Actual wire length may be up to longer.
For standard cartridges see TASER speCification RD-SPEC-CRTG-{)01 .
Material Safety Data Sheets (MSDS) related to nitrogen gas charged cartridges available upon request.
Dart grouping distances are averages measured in correlation to the laser dot projection at specified distance, test performed at

ambient temperature 70 ' F [25 'C], results listed are averaged +/-0.50" [1 .27 cm]. 'Spread" is average measurement from top
dart to bottom dart.
6.

Product speCification may change without notice; actual product may vary from picture"

7.

Simulator TASER Cartridge has blue color AFID micro-dots and no printing on the AFID micro-dots.

8.

Additio nal models available" Please contact a TASER International sales representative for more information"

trademark of
RD-SPEC-CRTG-002 Rev: E

I

.

October 2, 2006

l ASER International reserves the right to change this specification without notice.

Page: 1 of 1

TASER

IN T£RN.:.. T i O N J... L

sa vmg

/(V(?S ~l'e".t'

,,=;

35' TASER® Cartridge Specification

I i
2.
3.

The 35' cartridge MUST be Inserted into the TASER device with arrows facing up.
Anti-Felon Identification (AFID) tracking system with serialized micro-dots.
Drive stun capability (when attached to TASER electronic control device).

Housing: High impact black polymer
Patent: #5 ,078,117

Cartridge Trajectory ,

CARTRIDGE TRAJECTORY:
3S'CARTRIDGE

WARNING:
Af dlfl." tKti I,u fll" 1I2S: th<! top prow r,,,.,.1: ~ 11K! 10,., 'igh! po/PIt up
10 (I "'<I'>:cIm ... m Dr tspprcdM<l'ttly.fl ~ Qf " diSf\fn(. of II: I;diusfJN'U' <I';rn
(lCCOf'dhlg/rCIT Ihtti C d1JffJnca. tel " void hlnlllf) n"'ffl~bo6y (lMCJ.
$t'rgrcpJlit: ~unfcrron f).t/ow.

l OP PJl OBE

12'
COTtOM PRORE.

AVERAGE DARl TRAJECTORY IN CORRE.J.ATJON TO A LASER SIGHT LIN E
DEPLOYMENT

12'{3.66 m)

I_
TOP
,-,P_'.:.O_BE.:.A
.:.V.:.
'"".:..:.G.:.
' _ _ _ _ _+ _
"'-'.
.0· (10. 16 Ol\f

L:.B.:.
OTTO
.:..:..:.
....:.PR.:.O:.:Dco
• .:.
AIIEJ(
=.:.
AGE::..._ _--'-=
· '.::.'..:.'.:.1.6:.:'.:.'m
.:.'.:.___ _._ _

t--

r\~

VV

2.
3.

4.
5.

6.
7.
8.

I 2S'(7.62 m)
135'11 0.61 m f
! ;. crr 1.78 ml)
.---J....:::..D:.·.:..'.::"'::'::'.::<m::'_____--i
-'I_·.:.'=OD:..·:..'~:.:O.:.."'.:..=='_ _ _1' 34.0· (·e.G.36 ( 10)

)
"

j

1looI
..f---II
.....
'-

O~.....JJ::[JF===-.l

L

1..:::1

XP

be inserted into the
i arrows
i
TASER 35' Cartridge will resu lt in an inaccurate deployment and the risk of
to officers and/or suspects.
than 25', the top probe travels above the la ser sight point up to a maximum of approximately 4" at a distance of 12 feet. Adjust
you r aim accordingly at these distances to avoid hitting sensitive body areas. See additional TASER SYSTEM WARN INGS at
W\vw.TAS ER.com.
Actual wire length may be up to 6" longer.
Dimensions are in English [metric].
Material Safety Data Sheets (MSDS) related to nitrogen gas charged cartridges available upon request.
Dart grouping distances are averages measured in correlation to the laser dot projection at specified distance, test performed at
ambient temperature [70 "F (25 "C)l, results listed are averaged +/-0.50" [1.27 cm]. ·Spread" is average measurement from top
dart to bottom dart.
For additional information contact a TASER International sales representative or visit on line at: WlNw.TASER.com for additional
details.
Product specification may change without notice; actua l product may vary from picture.
•
Additional models available. Please contact a TASER International sales representative for more information.
trade
I
I

RD-SPEC-CRTG-003 Rev: C
October 2, 2006
TASER International reserves the right to change this specification without notice.

~age:

1 of 1

Ii?A if'A

~

2.
3.

IE: R

'NT £ ~§T ' ~ Nh L

S;:ivmg

lit"e~ E' t1en"

M26 SERIES ELECTRONIC CONTROL
DEVICE SPECIFICATION

era]

Wave form: Damped sine wave /"blunt" pulse
Pulse rate:
20 PPS ± 25% with NiMH rechargeable batteries
15 PPS ± 25% with alkaline batteries
Pulse duration: 40 microseconds full waveform 10 microseconds
primary phase
The trigger activates a 5-second cycle. The cycle can be stopped
by placing the safety lever in the safe position.
Peak open circuit arcing voltage: 50,000 V
Peak loaded voltage: 5,000 V
Current: 3.6 mA average
Energy per pulse:
Nominal at main capacitor: 1.76 joules
Delivered into load: 0.50 joules
Power rating:
Nominal at main capacitor: 26 watts
Nominal delivered into load: 10 watts
Power source: 8AA NiMH' or alkaline batteries
Temperature range:
NiMH batteries : -4 OF [-20 °C] to 122 OF [50°C]
Alkaline batteries: 32 OF [D oC] to 122 OF [50 °C]
Relati ve humidity: 15% to 80%
Housing: High impact polymer
12 other~~ lencJina
Patent: U.S.

2.
3.
4.
5.
6.

7.

8.
9.

Integrated 650 nm laser
acquisition).
Capable of drive stun without TASER
Cartridge installed .
Electrical charge can penetrate up to 2"
[5 cm] of clothing.
Ambidextrous safety levers.
Warranty: 1-year standard , with extended
warranties available at time of purchase·
Unit stores firings, date and time for
approximately 585 firings. Data can be
downloaded using an M26 data port
download kit, which can be ordered
separately.
For NiMH batteries, a charger is available,
TASER part number: 44710 or as a kit
with NiMH batteries and charger order
44705 .
Compatible with all TASER Cartridges'.4
The LED indicator shows that the laser is
on and the device is capable of firing, but
does not indicate that there is sufficient
battery power to fire or discharge.

are
i
2. M26 not available for sale the general public. Additional models available. Please contact a TASER
International sales representative for more information.
3. For standard cartridges see TASER specification RD-SPEC-CRTG-001 .
4. TASER Cartridges available up to a maximum range of 35' [10.67 m]. Use of cartridges not authorized by TASER
International will void the product warranty.
5. Product specification may change without notice; actual product may vary from picture.
6. Additional terms and conditions may apply (for additional information contact a TASER International sales
representative or visit online at: www. TASER.com for additional details.)
7. TASER recommends only Duracell® Ultra alkaline or Energizer®NiMH replacement batteries. Material Safety
Data Sheets (MSDS) concerning nickel metal hydride and alkaline batteries available upon request.
8. Output specifications may vary dependant upon temperature , battery charge and load characteristics.
9. ADVANCED TASER and TASER are registered trademarks of TASER International, Inc. All rights reserved.
10. Duracell® is a registered trademark of P.R.
and Co.

RD-SPEC-M26-001 Rev: J

October 2, 2006

TASER Inte mational reserves the right to change this specification without nolice.

Page: 1 of 1

~ TASER "
f&!
INTERNATIONAL

saVing fives e·L'C:': \' uRy

2.
3.

4.
5.

1.
2.

3.
4.
5.
6.

Jacket a.nd
Outer: Condura® (nylon
100%)
Inner: PU (nylon 100%)
padded, black, probe
resistant 100% woven nylon
Cordura®,
Helmet
Outer: cordura (nylon 100%)
Inner: SL (synthetic leather)
One size fits a1l 3 •
Clear probe-resistant face
shield.
The thickness of the
Simulation Training Suit is
0.39" [1 cm]

Simulation Training Suit Specification

2.
3.

4.
5.
6.
7.
8.
9.

Designed to be'used in conjunction with the blue TASER LS Training
Cartridges ONLY (model # 44205).
Padded light weight nylon for protection against probe tips penetration and dart
impact.
Heavy duty stitching on all seams for durability.
Hook and pile fasteners located on jacket, helmet, neck protector, forearm
extensions, pants and leg extensions provide for universal fit and adjustment.
Additionally pants have elastic waste band and suspenders.
Jacket, pants, shield and helmet are vented for air circulation.
Heavy duty tactical bag for storage and transportation.
Extra padding in the back of the coat, knee pads and elbow pads.
Helmet with visor designed to protect the face.
The simulation suit is designed for use with probe deployment from LS TASER
Cartridges ONLY, and does NOT stop electrical current. Using drive stun (with
or without any TASER Cartridge attached) OR deploying probes from other
than a simulation cartridge may result in incapacitating effect and/or pain to the
wearer.

Product
may change without notice; actual
uct may vary from picture.
The TASER Simulation Training Suit was designed to greatly reduce and possibly eliminate the number of dart penetrations
into the skin during authorized TASER instructor lead training or exhibition. TASER International makes no claims as to the
safety of this product in any other usage.
The TASER Simulation Training Suit was designed to accommodate a broad range of sizes for both male and females,
however it may not accommodate every possible size.
Dimensions are in English [metric].
Cordura is a registered trademark of Invista North America S.A.R.C. Corp.
T
is a
TASER Intemational Inc. All
reserved.

RD-SPEC-SIMSUIT-001 Rev: C

October 2, 2006

TASER International reserves the right to change this specification without notice.

Page: 1 of 1

;iKTABER
"
~
INTERNATIONAL

saving lives every da}'

TASERCAMTM

1-year ~tan,h:uY1'"
USB downloadable video.
Auto-record mode when safety switch is moved to the
armed "P pOSition. During the first second of video the
weapon serial number, date and time are recorded.
After the first second, only the seconds counter is
recorded.
Built in infra-red illumination source for low light and
zero light video recording capability.
Rechargeable through TASER AC charger. One spare
TASER Cartridge can be clipped onto the bottom of the
TASER Cam to provide additional on-weapon cartridge
storage capability.
If camera lens is blocked, the Central Information
Display (CID) and the laser on the X26 will flash to
indicate camera lens is blocked.
X26 firing records can also' be downloaded using the
TASER Cam ~nfllulalrA
W!:::Ilrr!:::IIlnn/·.

3.

4.
5.
6.

Environmental:
Humidity: 15% to 80% relative
Temperature range: -4°F [-20°C] to 122°F [50°C]
Power source: Rechargeable 1500 mAh lithium ion
battery6, capable of approximately 2 hours of video
recordingS and 100 firings, rated at 500 full
recharge cycles. Factory replaceable.
Video: 320X240 resolution QVGA black and white
at 10FPS, MPEG-4 Video/Audio compression
Flash memory:
Approximately 1 hour 30 minutes of recording time.
TASER Cam kit includes:
1 TASERCam
1 AC Charger with country specific adapter
1 CD with user manual
1 Quick Start guide

4.
5.

6.
7.

1. Dimensions are in Engl [metric].
2. Product specification may change without notice; actual product may vary from picture.
3. Computer must meet specific minimum requirements. (for additional infonnation contact a TASER International
sales representative. or visit online at: www.TASER.com for additional detailS.)
4. Additional warranties may be available based on country of purchase (for additional infonnation contact a TASER
International sales representative or visit online at: www.TASER.com for additional details.)
.
5. After the specified 1 hour 30 minute recording window the TASER Cam 1M will record over previously recorded
video until battery is depleted.
6. Material Safety Data Sheet (MSDS) concerning lithium batteries available upon request.
7. TASER Cam may have corrupted videos due to high voltage discharge. More apparent in sub zero temperatures.
8. TASER is
trademark of TASER International Inc. All
reserved.

RD-SPEC-VDPM-006 Rev: B

October 2, 2006

TASER International reserves the right to change this specification without notice.

Page: 1 of 1

.'

X26E SERIES ELECTRONIC
CONTROL DEVICE SPECIFICATION

Wave form: Complex shaped pulse
Pulse rate: 19 PPS
Pulse duration: 100 microseconds
The trigger activates a 5-second cycle. The cycle can be
stopped by placing the safety lever in the OS" position.
Peak open circuit arcing voltage: 50,000 V
Peak loaded voltage: 1,200 V
Current: 2.1 rnA average
Energy per pulse:
Nominal at main capacitors : 0.36 joules
Delivered into load: 0.07 joules
Power rating:
Nominal at main capacitors: 7 watts
Delive red into load: 1.3 watts
2. Power source: Digital Power Ma~azine (DPM),,8 or Xtended
Digital Power Magazine (XDPM) ,8
3 . • Temperature range: -4 ' F [-20'Cj to 122 ' F [50 'c]
4. Relative humidity: 15% to 80%
5. Housing: High impact polymer
6. Patent: U.S. D508,277 D504,489 and other patents pendirig

Integrated ultra-bright
(low
i
i
Integrated 650nm laser (used for target acquisition).
Capable of drive stun with or without TASER Cartridge
installed.
4. Electrical charge can penetrate up to 2" [5 em] of clothing.
S. Central Information Display (CID): 2 digit LED displays
remaining DPM energy percentage, burst time , warranty
expir.ation, unit temperature , illumination status and
current time and date.
6. Ambidextrous safety levers with Safe 'S" and Fire "F"
denotation.
7. Warranty: 1-year standard, with extended warranties
6
available.
8. Unit stores time, date, burst duration, unit temperature
and remaining DPM energy percentage for approximately
1,500 firings. Data can be downloaded using a USB data
interface module or TASER Cam which can be ordered
separately.
9. Compatible with all TASER Cartridges"'.
10.
I recorder capable with optional TASER

IfF!£JI

I.
j

L2

I

i

are

2.

TASER X26E not
for sale to the general public. Additional models available. Please contact a TASER
International sales representative for more information.
3. For standard TASER Cartridges see TASER specification RD-SPEC-CRTG-001 .
4. TASER Cartridges available up to a maximum range of 3S' [10.66 mI. Use of cartridges not authorized by TASER
International will void the product warranty.
S. Product specification may change without notice; actual product may vary from picture.
6. Additional terms and conditions may apply (for additional information contact a TASER International sales
representative or visit online at: www. TASERcom for additional details.)
7. Material Safety Data Sheets (MSDS) concerning lithium batteries available upon request.
S. Output specifications
vary
charge and load characteristics .

9.
RD-SPEC-X26E-001 Rev: H

October, 2006

TASER International reserves the right to change this specification without notice.

Page: 1 of 1

.,

;

TASER

I NT £IlN"'Tt DN ~L

S';,,",5' IIVeE o'I'e'··

~~!,

ADVANCED X-RAIL MOUNTING SYSTEM SPECIFICATION

•
Housing: Plastic
•
Hardware: Brass
2. Rails that accept XRAIL ':
• GG&G
•
Knight's Armament
•
LaRue Tactical
•
Sure Fire
•
Falcon Industries
3. Designed for use with TASER® X26E series electronic control devices
onl .

2.
3.

Picatinny rails.
All plastic surfaces covered with
non-reflective coating.
All exposed metal surfaces covered
with non reflective and corrosion
resistant phosphate coating.

1.
2.

The
I
i
I
I
i
Advanced X-Rail Mounting system does not work on the following rails: AR.M.S ., Fobus/1" SAMCO , Yankee Hill
Machine and Predator.
3. Dimensions are in English [metric].
4. For TASER X26 E see TASER Intemational specification RD-SPEC-X26E-001 .
5. Product specification may change without notice; actual product may vary from picture.
All
reserved .
is a
trademark of TAS ER

RD-SPEC-X-RAIL-001 Rev: C

October 2, 2006

TASER Intemational reserves the right to change this specification without notice.

Page: 1 of 1